Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
Results display
Event View
1
Click on Event View menu key to display a detailed description of one event
detected on trace.
2
Select the event to be described on the graphic (underlined in yellow).
The corresponding event description is displayed on the Zone 3, with a recall of
alarm threshold for this event:
Figure 46
SmartLink: Event View
3
Click on View Trace to display the selected event in the results table and zoomed
on trace.
NOTE
The event is framed in red if it is above the alarm thresholds defined in the
setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined in the Setup menu
Changing the type of an event
Once the Event View is displayed, the type of event can be modified:
1
Select the event to be modified (framed in yellow)
82
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
