Chapter 7 FiberComplete Modules
Configuring the units
•
IL/ORL Measurement: IL/ORL Bidir.
•
Length Measurement: Yes
•
OTDR Measurement: None
•
Fault Finder: No
•
Table View: Fiber
•
Thresholds: Default
Saving parameters from configuration
Once the File and Measurement parameters are configured, it can be saved in a config-
uration file.
This configuration file can then be recalled for future acquisition in FiberComplete mode.
To save parameters in a configuration file:
1
If File page is displayed, press S
2
Press Save Config. menu key
An edition keypad displays.
3
Enter a name for the configuration file.
Figure 131
Save Configuration file - Edition keypad
230
Directory into which files are saved
User Manual
to return to Setup page.
ETUP
.
78000010220 Rev. 024