Viavi 8100 V2 Series User Manual page 278

Chapter 7 FiberComplete Modules
Saving results and generating a report
[Cable_Id]
The cable results, which includes all fibers, are stored in a .blts file.
As soon as the Cable Id changes, the result table is cleared and the next tests are stored
with the new Cable Id name.
The table view can be modified in the Setup page (see
Filenaming convention for Fault Finder results
If the fault finder is selected, the fault finder sor trace is using the following filenaming
convention:
[Cable_Id][Fiber_Id][Fiber_Num]
Filenaming convention for OTDR results
If the OTDR is set to Auto, the sor traces have the following filenaming convention:
[Cable_Id][Fiber_Id][Fiber_Num]
A pre formatted .txt file can also be generated automatically at each measurement. It
includes the Fault Finder table.
Please refer to
functions.
242
Chapter 20 "File management"
User Manual
Figure 129 on page
for more information on storage/recall
78000010220 Rev. 024
225).