Configuring The Alarms Parameters - Viavi 8100 V2 Series User Manual

Portable, modular platform designed for the construction, validation and maintenance of optical fiber networks

Hide thumbs Also See for 8100 V2 Series:

Table of Contents

Chapter 3 Reflectometry measurements

Configuring the reflectometry test

Launch Cable / Receive Cable

Distance of the

launch cable

Include Link Start Connector / Include Link End Connector

Defining the Launch Cable End parameter with an event number or a distance will auto-

matically activate the corresponding parameter Include Link Start Connector. This

parameters can be set to Yes if the budget must include the connectors loss of the

launch cable at end

Defining the Receive Cable Start parameter with an event number or a distance, will

automatically activate the corresponding parameter Include Link End Connector. This

parameters can be set to Yes if the budget must include the connectors loss of the

launch cable at start

If those parameters are set to No, the budget only displays the connector loss of the

Configuring the Alarms parameters

In the Setup page, press Alarms softkey (if one parameter is selected in the current

screen, press Top Menu soft key to display the right menu keys and click on Alarms).

Once the Alarms page is displayed, configure the parameters for applying thresholds to

results displayed.

Launch Cable

Fiber Under Test

Distance of the

receive cable

78000010220 Rev. 024

Receive Cable