•
The Power Ref. menu key allows to reach the Standard Ref menu key. It also
allows to reach the Jumper Ref menu key if Power meter function is associated
with Source function onto another unit (see
back mode" on page
Result page of the Source
Once the source icon is selected, click on the
result page and to configure the source.
Figure 112
Source result page
Laser On / Laser Off
When the laser is on, the icon
The parameters of the source can be accessed directly on the result screen:
Wavelength
The wavelength value is displayed.
Chapter 5 Power meter and Source functions of the OTDR Modules
191).
Activation or shut-down of the laser (same function as the
S
button)
TOP
To change the wavelength when a multi-wavelength source is
present (depending on option).
User Manual
"Carrying out the reference in loop-
S
R
or
ETUP
is displayed.
78000010220 Rev. 024
Result page
button to display the
ESULTS
S
/
TART
187