Figure 182
Channel detection
3
Check all channels have been detected.
If not, add or remove channels:
a
Press Table Contents menu key
b
Press Add Channel or Remove Channel menu key.
4
Press Adopt Detected Channels menu key to adopt detected channels to the
acquisition grid.
In band PMD-OSNR measurement
Once the Grid is entered (with detection channels)
1
Press S
2
In the Mode parameter, select Grid.
3
Press View Setup Grid menu key to visualize the adopted grid.
Performing an In-Band PMD-OSNR measurement with an I-PMD Module
hard key to return to I-PMD Setup screen.
ETUP
User Manual
Chapter 11 I-PMD Measurement
78000010220 Rev. 024
step 3
step 4
367