Chapter 3 Reflectometry measurements
FTTA-SLM option
The different traces appear in the same window and can be managed as traces in
overlay (see
Results page
The trace(s) acquired or recalled from a memory is/are displayed on the Results page.
Trace View
The Trace view is displayed by default once OTDR acquisition is completed.
Figure 74
FTTA OTDR Trace
Once trace is displayed, you can:
•
Zoom on trace (see
•
Set Cursor A and/or Cursor B (see
•
Save trace(s) and launch a report of results (see
ating a report" on page
136
"Overlay trace function" on page
"Zoom function" on page
100)
User Manual
96).
75).
"Cursors" on page
"Saving the trace(s) and gener-
78000010220 Rev. 024
73).