Saving The Traces And Generating A Report; Saving Results And Creating A Report From Results Page - Viavi 8100 V2 Series User Manual

Finally, a bi-directional automatic measurement is performed for each fiber. Results are
stored in either one «.OEO» file or two «.SOR» files.

Saving the traces and generating a report

Once the results page is displayed, the traces can be saved and a report can be gener-
ated directly from the results screen.

Saving results and creating a report from results page

To save the trace (and generate a report):
1 Check in the results page that the OEO view is selected
2 Press Advanced > Fast Report key
A menu displays under the trace.
3 In the menu, configure the file saving (and the report).
Figure 119 Fast report configuration
a
b
In the Fiber Number parameter, modify if necessary the number of the fiber
In the Save Mode parameter, select:
File Only to save exclusively the traces in one oeo file or several .sor files
File + txt to save the trace in a oeo file or several .sor files and generate a
txt file of the results
File + pdf to save the trace in a oeo file or several .sor files and generate a
report of the trace and results in a pdf file.
User Manual
Chapter 6 Bi-directional OTDR
Saving the traces and generating a report
78000010220 Rev. 024
.
209