Table of Contents
Advertisement
Chapter 3 Reflectometry measurements
Performing OTDR acquisitions
Displaying Trace or SmartLink page
1
Use the menu key Trace/SmartLink to display either:
•
the acquisition trace in progress and the bar graph of time
•
the SmartLink page with exclusively the bar graph of time.
In the case of measurement on several wavelengths, once a measurement is completed
for one wavelength:
•
the Trace function allows to display the trace and results table for this wave-
length: once Trace is selected, press validation key
results table on 1 line to Trace + results table on 4 lines, and vice-versa,
•
the SmartLink function allows to display a graphical view of results.
Modifying acquisition parameters (in Real Time mode only)
You can modify the acquisition parameters without returning to the S
1
Press the
2
Use displayed keys to scroll through the possible values of the various acquisition
parameters.
Figure 33
Example of acquisition in Real Time
64
Acquisition Param
User Manual
key
78000010220 Rev. 024
to pass from Trace +
menu.
ETUP
Advertisement
Table of Contents
Troubleshooting
