Saving The Project; Loading An Existing Project - Viavi 8100 V2 Series User Manual

Saving the project

Once all configuration parameters are defined, save the project:
1 Press Save Project soft key (displayed when one parameter of the Cable Project
window is displayed).
2 In the Edition keypad opened, enter a name for the project and press Enter to
validate.
Figure 92 Enter a name for the project
The project file (.prj) contains Acquisition / Alarms / Link / File parameters and is
sa ved in root disk or Harddisk under project > EXPERT_OTDR > OTDR_SM or
OTDR_MM directory.
A directory is automatically generated with the project name, and it is saved under
(hard)disk > Project > EXPERT_OTDR > OTDR_SM or OTDR_MM. Measurements
are stored into this directory, as well as a summary text file.
NOTE
Once a project is created, the parameters cannot be modified except the
acquisition ones.

Loading an existing project

To open the project just created or to load an existing project
1 Press the Manage Project soft key on the Results screen
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
Smart Link Cable Option
.
159