Viavi 8100 V2 Series User Manual page 82

Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Figure 23 Cable structure menu
NOTE
The Cable Structure window is specific to an extremity. Each structure
keeps its own parameters by default. Modifications made to the one are not
automatically applied to the other. Thus, after the values relating to the origin
have been modified, it is normal not to find these same values entered for
the extremity.
View extremity
Cable Id
Color Coding
Cable content
–
–
–
46
If extremities are declared as different (see
on page 45), this parameter allows to navigate between the
Extremity and Origin parameters.
If the extremities are different, you can specify the cable identification
for the origin and the extremity.
Choice of whether or not to apply a color coding to the fiber. This
choice is made at link level, as all the fibers of a given link, for a
given extremity, will be coded the same way. This choice modifies
the result of the <Fiber Code> line. See
page 133.
Shows how the color code is to be used (see figure
menu" on page
FiberOnly the color code of the fiber is proposed (example: «Gold»)
Ribbon/Fiber The color code of the fiber is preceded by that of the ribbon,
and separated by a '/' (example: 'Bl/Or')
Tube/Fiber The color code of the fiber is preceded by that of the tube, and
separated by a '/' (example: 'Br/Or')
User Manual
46):
78000010220 Rev. 024
"Extremities are different"
"Fiber Code / Fiber Num" on
"Cable structure