Viavi 8100 V2 Series User Manual page 137

1 In the Recording Information screen, click on one parameter definition to modify
it.
Figure 54 Saving results in Smart Test mode
NOTE
The file is saved automatically by default with the Job Id parameter.
Example: if the Job Id is defined with Test Fiber 1, the otdr filename will be
Test Fiber 1.sor.
2 Click on one parameter configuration (white background) to modify it using the
edition or numeric keypad displayed:
– Fiber Id: click on the fiber name currently defined to display the edition
keypad and enter a new fiber name.
– Fiber Number; click on the fiber number currently defined to display the
numeric keypad and enter a new fiber number.
– Location A / Location B: click on the location name currently defined to
display the edition keypad and enter a new name.
– Job Id: click on the Job description currently defined to display the edition
keypad and enter a new description.
3 Once the recording information are correctly defined, click on File Only to save
the results in a .sor file,
or
User Manual
Chapter 3 Reflectometry measurements
Saving the trace(s) and generating a report
78000010220 Rev. 024 101