Table of Contents
Advertisement
Chapter 8 Optical Spectrum Measurement
Table of results
Type of display
The table may be displayed in a single line, on half of the screen or the whole screen as
a function of the Trace/Table key (see
Contents of the table with statistics
When selecting the Statistics measurement mode and multiple acquisitions are
performed, statistics are calculated on the results. To display these results in the table,
select the parameter Table Contents to Statistics.
1
the number of the channel
2
the frequency or the channel wavelength
3
the min. frequency or the channel wavelength
4
the max.frequency or the channel wavelength
5
the level of the channel in dBm
6
the min. level of the channel in dBm
7
the max. level of the channel in dBm
If the option "Osa Edit Table" is released more further more statistics are available by
using the User Defined Tables
Successive addressing of channels according to the sort
type selected
On the trace and in the table, it is possible to move the cursor from one channel to the
next in the selected sort order. To do this,:
1
Use the key
trace.
2
Press the
3
Press
Displaying relative results
By default, the table gives the results in absolute values. To obtain these results in rela-
tive values with respect to a reference channel:
1
Press the
272
Cursor A/Cursor B
Channel
key
and
to move the cursor to the following or preceding channel:
Table Contents
key, then
User Manual
"Trace /Table key" on page
to choose the cursor A or B to be used on the
Relative>/<Absolute
78000010220 Rev. 024
265)
to select Relative.
Advertisement
Table of Contents
Troubleshooting
