Zooming on the fiber end (in Real Time mode only)
During a real time acquisition, you can reach the end of the fiber under test at any time:
1
Press Zoom to End menu key.
The display automatically reaches the end of the fiber under test.
The menu key Zoom to End becomes Zoom to Start.
Press Zoom to Start to display the start of the fiber under test.
Performing measurements during acquisition (Real Time
mode only)
The real time mode allows to make Loss, ORL or Reflectance measurement using the
A & B cursors and the key Loss / ORL / Reflect.:
1
Position A & B cursors on the trace
2
Click as many times as necessary on key
between A & B cursors.
Figure 34
Example of loss measurement
Saving results for Smart Test acquisitions
Once the acquisition is completed, the results trace displays, in Smart Link view
1
Press Save menu key to save the results in a file.
User Manual
Chapter 3 Reflectometry measurements
Saving results for Smart Test acquisitions
78000010220 Rev. 024
to get the measurement
65