Viavi 8100 V2 Series User Manual page 237

The key View Process/Curves/Summary
Process page and to the Summary page.
In order to select and follow the status of a measurement, go to the Process page.
NOTE
When a measurement has been started, the slave MTS/T-BERD automati-
cally displays the Process page.
The Process screen is divided in three zones:
1 Information zone:
– Representation of the local MTS/T-BERD, with identification
– Representation of the distant MTS/T-BERD, with identification
– Status of the data connection: grayed when the link has been cut or the
connection not yet established, yellow when the connection is operational
– Status of the fiber connection: this is the status of the last tested fiber. The
fiber is represented cut and is grayed if the two units are not connected on
the same fiber. If the two units are connected on the same fiber, the link
does not appear cut. When a measurement is processed, the fiber is
displayed in red
– When the fiber connection is established, information providing the module
type and available wavelengths is displayed for both local and distant units
2 User guide zone:
A grey banner is displayed in the center of the screen where operation messages are
displayed.
The icon for keeping all events in memory
Evt/Free Evts is set on
using those markers (see
NOTE
This function keeps markers in memory for both local trace and distance
trace.
1.includes serial numbers of the mainframe and module as well as available wave-
lengths
2.requires active data connection
Lock Evt. In this case, the following measurement is performed
"Memorization of the position of events" on page
User Manual
Chapter 6 Bi-directional OTDR
Performing a bi-directional measurement
allows to change from the
is displayed in this zone if the key
78000010220 Rev. 024
Curve page to the
1
2
Lock
95).
201