Viavi 8100 V2 Series User Manual page 514

Chapter 17 Fiber Characterization
Fiber Characterization Test Sequence in Manual mode
4 Wait for the completion of FCOMPand OTDR testRed Testing light turns off.
5 Go to MTAU tab and select Out B
On the T-BERD/MTS 6000A
1 Press the S
2 Press the R
3 Touch the BBS tab
4 Touch the soft key Source Off/Source On to turn the source on
5 Touch the softkey CD/PMD/AP to position the test mode as CD
On the T-BERD/MTS 8000 V2
1 Go to CD tab and press the S
sequence.
2 Test is complete when the red Testing light turns off.
On the T-BERD/MTS 6000A
1 Touch the softkey CD/PMD/AP to position the test mode as PMD
On the T-BERD/MTS 8000 V2
1 Go to PMD tab and press the S
sequence.
2 Test is complete when the red Testing light turns off.
On the T-BERD/MTS 6000A V2
1 Touch the softkey CD/PMD/AP to position the test mode as AP.
On the T-BERD/MTS 8000 V2
1 Go to AP tab and press the S
sequence
Test is complete when the red Testing light turns off.
478
hard key to go to the Home page and activate the BBS function
YSTEM
hard key
ESULTS
TART
TART
User Manual
.
/S button to start the measurement
TOP
/S button to start the measurement
TART TOP
/S button to start the measurement
TOP
78000010220 Rev. 024