Chapter 12 High Resolution OSA Measurement
Configuration of the instrument
Figure 192
Setup for optical spectrum measurements
See OTDR Setup:
the Link parameters" on page 43
Acquisition Parameters
Sweep
Continue
Single
Statistics
Sweep Range
Select the frequency range in this sub-menu:
Full
Start/End
Center/Span
ITU Channel
384
"Configuring
See OTDR Setup:
"Configuring the File
parameters" on page 48
The OSA sweeps continuously and displays the results
The OSA performs one single sweep and displays the result
The OSA calculates a statistic of a number of scans. The number of
scans must be entered (next parameter).
Full wavelength range is used for measurement
Select manually the Start/End wavelength
Select manually the Center/Span frequency
Select the Channel Frequency
User Manual
78000010220 Rev. 024