1
Select the fiber number which does not need to be tested (framed in black).
2
Click on the soft key Deactivate fiber test.
3
Repeat the process for the fibers which do not have to be tested.
Figure 96
Fibers 4 and 6 deactivated
The deactivated fibers will be skipped while moving to next fiber to test.
CAUTION
If a test is deactivated on a fiber already tested, a dialog box displays:
«You're about to delete acquisition files. Are you sure?».
Click on Yes to confirm the deactivation, and by consequence, to delete cor-
responding trace(s).
Click on No to cancel the deactivation.
View Trace
1
In the project page, click on the fiber number for which you want to display the
corresponding trace.
2
Click on View Fiber Test soft key.
The trace result page displays.
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
Smart Link Cable Option
163