Modifying A User Defined Table - Viavi 8100 V2 Series User Manual

Figure 154 Customization of WDM table
2 In the right menu keys, check Value is defined to Available.
3 In Column Categories, select the category into which an item must be added to
user-defined table.
4 In Available Columns, select the item to be added to the table (video reversed).
5 Click on Add to Table menu keys.
The selected item is displayed on the right part of the screen, in the
column.
6 Repeat from
7 Press
8 Press R

Modifying a user defined table

The left column of the table editor page shows the result table column categories; the
column in the middle shows the corresponding result columns, and the right column
shows the columns, that are currently part of the result table.
By selecting a column category and one of the available columns you may compose
your own current result table by pressing the softkey Add to Table.
step 3 to step 5
Exit to return to Setup
to display the current trace open with the user defined table.
ESULTS
User Manual
Chapter 8 Optical Spectrum Measurement
to add all columns wished, up to seven.
screen.
78000010220 Rev. 024
WDM-Expert Software option
User Def. #
291