Chapter 3 Reflectometry measurements
Configuring the reflectometry test
Figure 18
OTDR Setup screen
In these windows, the parameter selected is in video inverse.
Configuring the Acquisition parameters
You can choose the OTDR acquisition parameters.
1
Once the Setup page is displayed, press Acquisition menu key to configure the
Acquisition parameters.
The Acquisition Setup page is divided into two parts: the Acquisition box and the
Launch cable box.
If some acquisition parameters are not accessible (not visible or displayed in
grey), check in the Home page that the Expert OTDR function is selected
(see
32
"Selecting the Expert OTDR function" on page
User Manual
78000010220 Rev. 024
27).