Viavi 8100 V2 Series User Manual page 87

Fiber[Cable_Id][Fiber_Num]_[Lambda]_[Direction][Pulse]
The name of the file is displayed in grey under Filenaming parameter
File Content
In this parameter, select the file content for traces saving:
One Trace in case of traces in overlay, each trace is saved in a distinct file (.sor
extension).
All Traces in case of traces in overlay, all traces are saved in one single file
(.msor extension).
One and All Traces
this option combines the two previous ones: in case of traces in
overlay, each trace is saved in a distinct file and all traces are saved
in one single file.
NOTE
This parameter is not available with RDZ application (see
Zone OTDR application" on page
Auto Store
Select Yes to store automatically the trace or traces resulting from each acquisition
according to the filenaming rules.
Report Configuration
A report can be generated from the OTDR results page at the same time as the trace
saving (see "Saving the trace(s) and generating a report" on page
The report configuration is performed form the File Setup page
Report As
Select the report format to be generated: Txt / Pdf or All (pdf + txt format).
Select No if no report must be generated.
Report Layout
This parameter allows to define the report page setting:
Standard in multi-traces display, one report page is generated for each trace.
User Manual
Chapter 3 Reflectometry measurements
Configuring the reflectometry test
167).
78000010220 Rev. 024
"Reduced Dead
100).
51