Table of Contents
Advertisement
•
Floor
-
define the Type of Label (Alphabetical / Numerical / None) and enter
the Min and Max values and the Separator type
«/»; «_»).
or
-
enter a floor number for Floor 1 & Floor 2.
•
Telecom Room
-
define the Type of Label (Alphabetical / Numerical / None) and enter
the Min and Max values and the Separator type (No; «.»; «:»; «-»:
«/»; «_»)<Exposant>1
or
-
enter an identification for Telecom Room 1 and Telecom Room 2.
•
Rack-X / Rack-Y
•
Panel Slice
•
Panel
•
Port/Position
•
Backbone Cable
•
Cable
•
Building
1. This parameter can be modified exclusively with «Custom» configuration
2. This parameter can be modified exclusively with «Custom» configuration
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
Press
to open the sub-menu, different according to the
selected configuration:
Press
to open the sub-menu, different according to the
selected configuration:
Press
to open the sub-menu, define the Label Type
(Alphabetical / Numerical / None) and enter the Min and Max
values and the Separator type (No; «.»; «:»; «-»: «/»; «_»).
Press
to open the sub-menu, define the Label Type
(Alphabetical / Numerical / None) and enter the Min and Max
values and the Separator type (No; «.»; «:»; «-»: «/»; «_»).
Press
to open the sub-menu, define the Label Type
(Alphabetical / Numerical / None)
values and the Separator type (No; «.»; «:»; «-»: «/»;
<Exposant>1
«_»)
Press
to open the sub-menu, define the Label Type
(Alphabetical / Numerical / None)<Exposant>1 and enter the
Min and Max values.
Press
to open the sub-menu and enter the Min and Max
values according to the Label Type defined (not changeable).
Press
to open the sub-menu and enter the Min and Max
values according to the Label Type defined (not changeable).
Enter an identification for Building 1 and Building 2.
User Manual
Chapter 3 Reflectometry measurements
.
78000010220 Rev. 024
1
(No; «.»; «:»; «-»:
2
and enter the Min and Max
113
Advertisement
Table of Contents
Troubleshooting
