Viavi 8100 V2 Series User Manual page 569

Managing tabs
Tabs give access to the File menu of each application (OTDR, OSA, Power Meter, etc.)
present in the instrument.
It is possible to open a file even if the corresponding module is not present in the instru-
ment (e.g. OSA file without OSA module). A new tab then temporarily manages this
application.
When several different applications (corresponding to modules or plug-ins for different
measurements) are managed by the MTS / T-BERD, pressing the F
in succession changes from one tab to another to give access to the file configuration of
the desired application (e.g. OTDR, OSA, etc.). See
File signature
The acquisition parameters of the trace contained in the selected file are displayed at
the top of the screen together with a small-scale representation of the trace (provided it
was acquired on a MTS / T-BERD) (see
Figure 271 Example of signature of an OTDR file
1
10
1 Mini-trace
2 Laser
3 Pulse width
4 Fiber Identification
5 Color Code
6 Fiber Number
7 Cable Identification
8 Direction of measurement
2 3 4
11 12 13
User Manual
"Tabs" on page
"Mini-trace" on page
5 6 7
14
9 Alarm status
10 Plug-in used
11 Comment
12 Resolution
13 Acquisition Time
14 Refraction Index
15 Date of signal acquisition
16 Time of signal acquisition
78000010220 Rev. 024
Chapter 20 File management
Description of the explorer
key several times
ILE
23.
22).
8
16
15
9
533