Changing The Type Of An Event - Viavi 8100 V2 Series User Manual

The corresponding event description is displayed on the Zone 3, with a recall of
alarm threshold for this event:
Figure 89 SmartLink: Event View
3 Click on Trace View to display the selected event in the results table and zoomed
on trace.
NOTE
The event is framed in red if it is above the alarm thresholds defined in the
setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined for this type of event.

Changing the type of an event

Once the Event View is displayed, the type of event can be modified:
1 Select the event to be modified (highlighted in yellow)
2 Press Event Code menu key
3 Click on the event type to be applied to the selected event:
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
FTTH-SLM Software option
155