Viavi 8100 V2 Series User Manual page 139

c In the Cable Id parameter, enter/modify the name of the Cable using the
edition keypad.
d In the Direction parameter, select/modify the direction, to define if the
measurement has been performed from Origin to Extremity (A -> B) or from
Extremity to Origin (B -> A).
e In the Location A and Location B parameters, enter/modify the name of
Origin and Extremity.
3 Once saving is configured as wished, press Save All menu key
4 Enter a name for the file in the edition keypad.
or
Click on Auto Filenaming menu key to apply the file name defined in the Setup
screen, in Filenaming parameter (see
5 Press Enter to validate.
NOTE
The sor file and the txt or pdf file will have the same name.
The icon
Once saving is completed, a sound is emitted onto the Platform.
NOTE
The file and the report are saved in the last storage media and directory
selected.
NOTE
The file saving can also be performed from the F
"Saving Files from the Explorer" on page
Saving and report for traces in overlay
If several traces are displayed in overlay in the results page, one or several file(s)/
report(s) is/are generated:
• If in the File Setup page (S
with One Trace, one .sor file and one pdf/txt report will be generated for each
trace
displays during saving process.
ETUP
User Manual
Chapter 3 Reflectometry measurements
Saving the trace(s) and generating a report
"Filenaming" on page
535).
> File), the parameter File Content is defined
78000010220 Rev. 024
50)
> Explorer page (see
ILE
103