Viavi 8100 V2 Series User Manual page 80

Chapter 3 Reflectometry measurements
Configuring the reflectometry test
The fiber code corresponds to the fiber color if, in the Cable Structure, the parameter
Color coding is defined on Yes.
Select the parameter Fiber Number/Fiber Code and modify the parameter using the left
and right direction keys.
The fiber number can be automatically incremented/decremented at each new
file save if it has been configured in the File Setup page (see
parameters" on page
NOTE
The Fiber Code and the fiber number concatenated with
interdependent: they are incremented or decremented at the same time.
However, the fiber number remains a number only, while the fiber code is
alphanumerical. Whether it includes a color code or not (see
ture" on page
Table 22 on page
Figure 22
Fiber and cable parameters used in the example:
Fiber Name: 'Fiberx'
Cable Content: 'Tube/Fiber'
Max Tube: 12
Max Fiber: 24
Coding used for the fiber and the tube: TIA
Color Code
<Fiber Name>
<Fiber Code>
Change Fiber Nbr
Increment
Decrement
User defined
44
48).
45), it may be composed of one, two or three parts (see figure
44).
Example of incrementation of fiber code
Fiber N
Yes
Fiberx24
Bl/Aq-
the fiber number is automatically incremented at each new file-save.
the fiber number is automatically decremented at each new file-save
Use Edit Number softkey to enter the increment/decrement value for
fiber number.
User Manual
No
Fiberx24
1/24
78000010220 Rev. 024
"Configuring the File
Fiber Name
"Cable struc-
Fiber N+1
Yes No
Fiberx25 Fiberx25
Gold/Bl 2/1
are