Table of Contents
Advertisement
Fiber Number
1
Select the parameter Fiber Number and modify the number of the fiber to be
tested.
The fiber number can be automatically incremented/decremented at each new file save
if it has been configured in the Change Fiber Nbr parameter (see
on page
147).
Change Fiber Nbr
Increment
the fiber number is automatically incremented at each new file-save.
Decrement
the fiber number is automatically decremented at each new file-save
No
the Fiber number must not automatically modified.
User defined
Use Edit Number softkey to enter the increment/decrement value for
fiber number.
Note: to decrement the number, enter the sign «-» before the number. Example: -
1.
Min: -999 / Max: 999 / Auto: 0
Operator
Use the arrow
to enter the name of the operator carrying out the measurement.
Comment
Use the arrow
to enter a comment, which will be displayed in the file signature, on the
upper part of the screen.
File parameters
Press the File menu key (or Next key when one parameter of the File page is selected)
to configure the File saving parameters for the OTDR measurements.
Dir
The Dir parameter displays the directory (and sub-directory) into which file(s) will be
saved and cannot be modified.
To modify the location of files saved, go to explorer page (pressing File hard key) and
select another media storage/directory.
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 024
FTTH-SLM Software option
"Change Fiber Nbr"
147
Advertisement
Table of Contents
Troubleshooting
