Viavi 8100 V2 Series User Manual page 184

Chapter 3 Reflectometry measurements
FTTH-SLM Software option
Filenaming
Select the parameter and modify the name of the file for the result trace.
a
b
Figure 83 Filenaming - Edition keypad
The name of the file is displayed in grey under Filenaming parameter
Press the Default Filename menu key to apply the name by default for the file:
[Test_Point]_[Date_Time].
File Content
In this parameter, select the file content for traces saving:
One Trace
All Traces
Save Mode
When a trace or more is displayed, in the parameter Save Mode, you can select three
types of methods for storing traces:
File Only
File + txt
148
In the edition keypad, enter a name manually for the file and/or use the
predefined parameters available (ONT_Id, Feeder_Id...).
Press Enter to validate.
in case of traces in overlay, each trace is saved in a distinct file (.sor
extension).
in case of traces in overlay, all traces are saved in one single file
(.msor extension)
only the trace(s) is/are stored in one/several file(s), with its extension
(.sor or .msor)
the trace(s) is/are stored in one/several file(s), with its extension and
one txt file is also generated.
User Manual 78000010220 Rev. 024
Predefined
parameters
for naming
files