Table of Contents
Advertisement
Pass
Fail
The number of fiber is highlighted in different color according to the alarm status:
Pass
Fail
View Trace
1
In the project page, click on the fiber number for which you want to display the
corresponding OTDR trace (e.g.
2
Click on View Trace(s) soft key.
The trace result page displays.
Figure 63
Trace from fiber selected in project
Name of the label
Once the traces are displayed, one can:
•
Zoom on trace (see
•
Set Cursor A and/or Cursor B (see
Enterprise-SLM Software option (T-BERD/MTS-6000A V2 only)
No Alarm defined
No test performed on the fiber
Number of the fiber tested
"Zoom function" on page
User Manual
Chapter 3 Reflectometry measurements
).
75).
"Cursors" on page
78000010220 Rev. 024
Click to return to
project
73).
121
Advertisement
Table of Contents
Troubleshooting
