Chapter 8 Optical Spectrum Measurement
WDM-Expert Software option
To rearrange the sequence of the columns in the result table select one of the result
column in the Current Table column.
Figure 155
Modify / Remove items
Once a User defined table is available, it can be modified at any time from the Setup
page:
•
the position of a value in the table can be modified
•
a value can be removed from the table.
1
In the Display parameters, press
2
Select the User Def. 1, 2, 3 or 4 to be modified
3
Press Edit Table
4
In the column User Def. #, click on the parameter (= value) to be removed or
moved.
The menu key Value is defined to Actual. and the menu keys are modified.
5
Click on Move Item up ˄ or Move Item down ˅ to change the position of the item
in the table.
or
Click on Remove from Tab. X to delete the item form the table.
292
User Manual
Table Content
parameter.
78000010220 Rev. 024