Table of Contents
Advertisement
Chapter 2 Getting started
AC/DC safety information
AC/DC safety information
Do not use any mains adaptor other than the one supplied with the instrument, or
supplied by Viavi as an option for this instrument.
If another adapter is used, it may damage the Product Name/Family Brand/ T-BERD/
MTS-6000A V2 itself.
Other basic safety precautions are as follows:
•
Do not use AC/Adapter/Charger outdoors or in wet or damp locations
•
Connect the AC/Adapter/Charger to the correct mains voltage, as indicated on
the ratings label.
•
Do not allow anything to rest on the power cord, and do not locate the product
where people can walk on the power cord.
•
Avoid using this product during an electrical storm. There may be a remote risk of
electric chock from lightning.
•
Do not use this product in the vicinity of a gas leak or in any explosive environ-
ment.
•
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous, high voltage points and other hazards. Contact
qualified service personnel for all service.
Precautions relating to optical connections
•
The normal operating life of an optical connector is usually of the order of a few
hundred manipulations. It is then advisable to manipulate the optical connections
as rarely as possible.
•
The proper operation of the instrument and its accuracy of measurement are
dependent on the cleanliness of the environment and the optical connectors as
well as the care taken in its manipulation.
•
The optical connectors must therefore be clean and dust-free. If the optical
connection is not being used, protect the connections of the module using the
protective caps.
14
User Manual
78000010220 Rev. 024
Advertisement
Table of Contents
Troubleshooting
