Table of Contents
Advertisement
Report Layout
This parameter allows to define the report page setting and is available exclusively if a
pdf or txt file has been defined in the Report As parameter.:
Standard
Consolidated
Report naming
If Consolidated is defined for Report Layout, select Report naming parameter and
click on the text box to modify the name of the report file for the result trace.
Using the on-screen keyboard, enter a name manually for the file and press
validate.
If no name is entered, the report name by defaut applies: Report_PMD.
Saving configuration in a file
Once parameters have been configured, they can be kept in memory and saved in a
configuration file.
This file can then be recalled in order to be recalled for future PMD acquisitions.
To save parameters in a configuration file:
1
If necessary, press S
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press Save Config. key
4
Enter a name for the configuration file using the edition keypad.
NOTE
Configuration file is saved in the directory disk/config/PMD.
5
Press
A sound is emitted to indicate the file is saved.
The configuration file is saved with the extension ".fo_cfg" (icon
recalled at any time from the Explorer page.
Chapter 2 Polarization Mode Dispersion Measurement
in multi-traces display, one pdf report page is generated for each
trace.
in multi-traces display, one pdf report page is generated for all traces
to return to Setup page.
ETUP
to validate.
User Manual
.
700MAN902 Rev. 000
Configuring the PMD test
) and can be
to
19
Advertisement
Table of Contents
