Instrument Setup; Setting Up 3D Disto; Connecting The 3D Disto To A Windows Device - Leica 3D Disto User Manual

3
3.1
Setup Step-by-Step
3.2
Connect 3D Disto to a
Windows Device Step-
by-Step

Instrument Setup

Instrument Setup

Setting Up 3D Disto

The following description assumes setup on a tripod. You can also place the
3D Disto on flat surfaces such as floor or boards.
Step Description
It is always recommended to shield the instrument from direct
☞
sunlight and avoid uneven temperatures around the instrument.
1. Set up the tripod in a suitable place
where the points to be measured can be
targeted well and extend the tripod legs
to a comfortable working height.
2. Place the 3D Disto onto the tripod head.
Tighten the central tripod fixing screw.
3. Centre the circular bubble on the 3D
Disto by adjusting the tripod legs.
4.
Press to turn on the instrument.
3D Disto starts self-levelling: the tilt is
checked by a tilt sensor and the instru-
ment levels itself if the tilt is < 3°.
Do not move the 3D Disto while self-levelling procedure is running.
☞

Connecting the 3D Disto to a Windows Device

Starting the Software
Step Description
1. To start the software, click the 3D Disto icon on your desktop.
When starting the software for the first time, the following screen
is displayed:
If necessary change the settings.
Press to continue.
4
2
3
1
1
010813_001
27
1