Table of Contents
Advertisement
3.4
3.5
3.5.1
6/1553-DBC 434 01 Uen G1 2016-03-08
The call list indicator is switched off.
2.
Step through the call list by pressing the navigation keys
3.
Press the
AUTOMATIC ANSWER
When the automatic answer feature is active, incoming calls are answered automati-
cally in handsfree mode. This means that you get speech connection without having to
perform any action. The feature is set by the system administrator.
There are two optional settings for the automatic answer feature:
•
With delay: One ring signal is heard before the call is answered.
•
Without delay: The call is answered immediately, no ring signal is heard.
Changing the settings for automatic answer requires administrator rights, but you can
view the current settings.
To view the automatic answer settings, do the following:
1.
Press
.
2.
Select Auto answer and press Select.
The current setting is displayed.
ANSWERING A SECOND INCOMING CALL
You have three access lines (
have the same extension number. This feature is called triple access line.
To answer a second incoming call, do the following:
1.
You have an ongoing call on the
new incoming call.
2.
Press
key to answer.
The first call is put on hold.
Note: To answer a second incoming call, you have to activate Free on busy, see
below. A call waiting call can be answered although free on busy is not activated.
ACTIVATING FREE ON BUSY
To activate Free on busy, do the following:
1.
Press Presence.
2.
Select Free on busy: OFF, and press Select.
3.
Select ON put call through, and press Set.
A confirmation question is displayed.
4.
Press Yes to confirm.
Note: If you have ongoing calls on line 1 and on line 2 and if there is a new call received
on line 3, you cannot transfer any of the calls to a fourth part.
key to exit the call list.
,
,
) for incoming and outgoing calls. All lines
key, and the
I
C
NCOMING
ALLS
.
key flashes to indicate a
32
Advertisement
Table of Contents
