Xerox WorkCentre 5687 Series Service Manual page 1771

PL 10.12 Inverter Assembly (2 of 4)
Item Part Description
1 – Inverter output assembly (P/O PL
10.11 Item 23)
2 – Post fuser gear (20T) (REF: PL
10.15 Item 7)
3 013E36980 Bearing
4 – Dog drive assembly (REF: PL
10.15 Item 6)
5 – Idler gear (20T) (REF: PL 10.15
Item 4)
6 – Tri-roll knob (REF: PL 10.15 Item
12)
7 – Inverter gate (REP 10.11)
8 – Tri-roll shaft assembly (REP 10.12)
9 – Post fuser exit roller (P/O PL 10.11
Item 23)
10 – Tri-roll guide (P/O PL 10.11 Item
23)
11 – Front gravity finger (P/O PL 10.11
Item 23)
12 – Gravity gate finger (P/O PL 10.11
Item 23)
13 – Rear gravity gate finger (P/O PL
10.11 Item 23)
14 038K17840 Upper baffle
15 – Idler roll (P/O PL 10.12 Item 22, PL
10.12 Item 23)
16 – Idler roll shaft (P/O PL 10.12 Item
22, PL 10.12 Item 23)
17 – Spring (P/O PL 10.12 Item 22, PL
10.12 Item 23)
18 003K19600 Post fuser jam clearance latch
19 – Inverter sensor (P/O PL 10.12 Item
22) (65-87 ppm)
20 – Hinge pin (P/O PL 10.12 Item 22,
PL 10.12 Item 23)
21 – Torsion spring (P/O PL 10.12 Item
22, PL 10.12 Item 23)
22 038k17640 Upper baffle assembly (65-87 ppm)
(REP 10.7)
23 038K17460 Upper baffle assembly (32-55 ppm)
WorkCentre 5687 Family
August 2007
5-59
Parts Lists
PL 10.12