Xerox WorkCentre 5687 Series Service Manual page 1761

PL 8.45 Tray 5 Feed Assembly (2 of 2)
Item Part Description
1 059K51080 Upper feed assembly
2 – Feed/nudger/retard roller (P/O PL
8.45 Item 30) (REP 8.34)
3 – Nudger roll (P/O PL 8.45 Item 1)
4 – One way coupling (P/O PL 8.45
Item 1)
5 – Take away idler roller (P/O PL 8.45
Item 1)
6 130E11610 Tray 5 empty (Q07-401) /feed
sensor (Q08-105) (REP 7.13, REP
8.25)
7 130E12060 Stack height sensor (Q07-402)
(REP 7.14)
8 – Actuator pivot shaft bearing (P/O
PL 8.45 Item 10)
9 – Torsion spring (P/O PL 8.45 Item 1)
10 059K58710 Lower feed assembly
11 – Actuator pivot shaft (P/O PL 8.45
Item 10)
12 – Retard clutch (P/O PL 8.45 Item 10)
13 – One way pulley clutch (P/O PL 8.45
Item 10)
14 – Take away roller (P/O PL 8.45 Item
10) (REP 8.38)
15 – Bearing (P/O PL 8.45 Item 10)
16 – Clutch (P/O PL 8.45 Item 10)
17 – Clutch (P/O PL 8.45 Item 1)
18 – Gear (38T) (P/O PL 8.45 Item 1)
19 – Torsion nudger spring (P/O PL 8.45
Item 1)
20 – Housing spring (P/O PL 8.45 Item
1)
21 – Torsion chute spring (P/O PL 8.45
Item 1)
22 – Torsion retard spring (P/O PL 8.45
Item 10)
23 – Bearing (P/O PL 8.45 Item 1)
24 – Roller belt (P/O PL 8.45 Item 1)
25 – Washer (P/O PL 8.45 Item 1)
26 – Feed/nudger/retard roller shaft (P/O
PL 8.45 Item 10)
27 – Upper feed assembly top cover (P/
O PL 8.45 Item 1)
28 – Upper feed assembly base (P/O PL
8.45 Item 1)
29 – Lower feed assembly base (P/O PL
8.45 Item 10)
30 – Feed roll kit (Pack of 3) (P/O PL
31.13 Item 24)
WorkCentre 5687 Family
August 2007
5-49
Parts Lists
PL 8.45