Xerox WorkCentre 5687 Series Service Manual page 1747

PL 7.68 Tray 5 Lift assembly (1 of 2)
Item Part Description
1 – Tray assembly (complete) (REF: PL
7.70 Item 1)
2 – Crash bar (Not Spared)
3 – Frame top brace (Not Spared)
4 – Elevator motor (MOT07-373) (P/O
PL 7.68 Item 24) (REP 7.16)
5 – Elevator motor encoder sensor
(Q07-406) (P/O PL 7.68 Item 24)
(REP 7.16)
6 – Elevator motor bracket (P/O PL
7.68 Item 24)
7 – Elevator motor shaft (Not Spared)
8 960K35024 Control PWB
9 130K75510 Stack down sensor (Q07-405)
(REP 7.15)
10 – Standoff (Not Spared)
11 – Tray level drive gear clip (Not
Spared)
12 110E06961 Upper limit switch (S07-412) (REP
7.17)
13 – Rear elevator rack (P/O PL 7.68
Item 25)
14 – Front elevator rack (P/O PL 7.68
Item 25)
15 – Retard roller shield (Not Spared)
16 – Not used
17 – Shipping pin bearing (Not Spared)
18 – Shipping pin spring (Not Spared)
19 – Shipping pin (Not Spared)
20 – Shipping pin handle (Not Spared)
21 – Cable tie (Not Spared)
22 – Clinch stud (P/O PL 7.68 Item 2)
23 – Cable holder (Not Spared)
24 127K56330 Elevator motor assembly
25 007K19660 Elevator rack assembly
WorkCentre 5687 Family
August 2007
5-35
Parts Lists
PL 7.68