Xerox WorkCentre 5687 Series Service Manual page 1742

PL 7.30 Bypass Tray and Left Hand
Door Assembly
Item Part Description
1 050K67880 Bypass tray and left hand door
assembly (32-55 ppm) (REP 7.5)
2 – Left hand door (P/O PL 7.30 Item 1,
PL 7.30 Item 27)
3 – Left hand door interlock (S01-305)
(Not Spared)
4 121E25680 Feed solenoid (SOL08-050) (REP
8.9)
5 – Feed head assembly (P/O PL 7.30
Item 1, 27) (REP 8.19)
6 – Feed head (P/O PL 7.30 Item 5)
7 130E11610 Bypass tray empty sensor (Q07-
335) (REP 8.23)
8 – Hinge pin (Not Spared) (NOTE 1)
9 – Spring retainer (P/O PL 7.30 Item
5)
10 809E57640 Spring drive gear
11 807E05311 Drive gear (REP 8.20)
12 – Bypass tray (P/O PL 7.30 Item 1,
27)
13 809E84190 Ground spring
14 – Feed head top cover (P/O PL 7.30
Item 5)
15 – Feed roll (P/O PL 7.30 Item 21)
(REP 8.21)
16 – Nip roll (P/O PL 7.30 Item 5)
17 – Left hand door cover (P/O PL 7.30
Item 2)
18 – Retard pad bracket (P/O PL 7.30
Item 21)
19 – Retard pad assembly (P/O PL 7.30
Item 21)
20 – Retard pad spring (P/O PL 7.30
Item 21)
21 059K39862 Feed roll and retard pad assembly
(REP 8.22)
22 – Solenoid spring (P/O PL 7.30 Item
4)
23 – Interlock cover (Not Spared)
24 130E12760 Tray 1/2 feed sensor (Q08-101)
(REP 8.24)
25 130E12770 Wait Sensor (Q08-100, Q08-110)
(65-87 ppm) (NOTE 2) (REP 8.17)
26 – Not used
27 050K67890 Bypass tray and left hand door
assembly (65-87 ppm) (REP 7.5)
28 962K64040 Connection harness
NOTE: 1: Hinge pins (PL 7.30 Item 8) are supplied with the
front door.
NOTE: 2: Refer to PL 8.15 Item 3 for the 32-55 ppm wait
sensor.
Parts Lists
PL 7.30
August 2007
5-30 WorkCentre 5687 Family