Xerox WorkCentre 5687 Series Service Manual page 1752

PL 8.17 Registration Transport (65-87
ppm)
Item Part Description
1 059K60050 Registration transport assembly
(REP 8.4, ADJ 8.1)
2 – Retainer bracket (Not Spared)
3 – Registration sensor (Q08-150)
(REP 8.15)
4 – Registration transport guide (P/O
PL 8.17 Item 1)
5 – Registration nip assembly
6 – Snap on washer (M6)
7 – Registration clutch (CL08-070)
(REP 8.5, ADJ 8.1, ADJ 4.1)
8 013E36980 Bearing
9 – Drive roll assembly (REP 8.26)
10 – Jam clearance knob (P/O PL 8.17
Item 1)
11 – Gear (26T) (P/O PL 8.17 Item 1)
12 – Spring arm (P/O PL 8.17 Item 1)
13 – Torsion spring (P/O PL 8.17 Item 1)
14 – Gear (28T) (P/O PL 8.17 Item 1)
15 – Ring pitch (P/O PL 8.17 Item 1)
16 – Black nylon washer (P/O PL 8.17
Item 1)
17 – Gear (22G/28T) (P/O PL 8.17 Item
1) (ADJ 4.1)
18 – Gear (23T) (P/O PL 8.17 Item 1)
(ADJ 4.1)
19 – Gear (22G/20T) (P/O PL 8.17 Item
1)
20 – Drive belt (P/O PL 8.17 Item 1)
(REP 8.27)
21 – Spring arm pin (P/O PL 8.17 Item 1)
22 – Lower bias guide (P/O PL 8.17 Item
1)
23 – Bias contact (NOTE)
24 – Clutch cover (Not Spared)
25 – Registration sensor bracket (Not
Spared)
NOTE: This is a HFSI item. Refer to GP 17 and reset the bias
foam count to zero in the feature screen.
Parts Lists
PL 8.17
August 2007
5-40 WorkCentre 5687 Family