Xerox WorkCentre 5687 Series Service Manual page 1739

PL 7.17 HCF Tray 3 and 4 Assembly (2
of 2)
Item Part Description
1 – Tray 4 assembly (REF: PL 7.15
Item 2)
2 – Tray 3 assembly (REF: PL 7.15
Item 3)
3 049K00300 Tray 3 and 4 clamp kit
4 – Side clamp (2 off) (P/O PL 7.17
Item 3)
5 – Center clamp (P/O PL 7.17 Item 3)
6 – Tray 3 & 4 mylar retainer clip kit (P/
O PL 31.13 Item 9)
7 – Retainer clip (Wide) (6 off) (P/O PL
7.17 Item 6)
8 – Retainer clip (Narrow) (2 off) (P/O
PL 7.17 Item 6)
9 – Side edge flexure spring (Not
Spared)
10 – Paper tray guide (Not Spared) (ADJ
7.1)
11 – Flexure spring (Not Spared)
12 009K02380 Top edge flexure spring
13 – Retaining clips (Not Spared)
14 – HCF Tray alignment clip kit (P/O PL
31.13 Item 1)
15 – Front clip (P/O PL 7.17 Item 14)
16 – Rear clip (P/O PL 7.17 Item 14)
17 – Alignment locking clip (P/O PL 7.17
Item 14)
18 005E21801 Elevator dives gear coupling
19 019E75120 Pad Metamoll
WorkCentre 5687 Family
August 2007
5-27
Parts Lists
PL 7.17