Mac Learning-Limit Station-Move-Violation - Dell C9000 Series Reference Manual

mac learning-limit station-move-violation

Specify the actions for a station move violation.
C9000 Series
Syntax
mac learning-limit station-move-violation {log | shutdown-both |
shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log
shutdown-both
shutdown-
offending
shutdown-original Enter the keywords shutdown-original to shut down the
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.8.1.0
7.5.1.0
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Enter the keyword log to generate a syslog message on a
station move violation.
Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down the
offending interface and generate a syslog message.
original interface and generate a syslog message.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Layer 2 1319