Show Running-Config Pim - Dell C9000 Series Reference Manual

Field
RPF neighbor
Outgoing
interface list:
Example
Dell#do show ip pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P -
Pruned,
Join SPT,
Advertisement
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 00:40:16, expires 00:00:00, RP 20.40.4.4,
flags: SCJ
(20.10.4.9, 225.1.1.1), uptime 00:06:21, expires 00:02:06, flags:
CT
(*, 225.1.1.2), uptime 00:40:15, expires 00:00:00, RP 20.40.4.4,
flags: SCJ
(20.10.4.9, 225.1.1.2), uptime 00:06:21, expires 00:02:06, flags:
CT

show running-config pim

Display the current configuration of PIM-SM snooping.
C9000 Series
Syntax
show running-config pim
Description
Displays the next hop from this interface towards the RP/source.
Lists the interfaces that meet one of the following criteria:
•
•
•
R - RP-bit set, F - Register flag, T - SPT-bit set, J -
M - MSDP created entry, A - Candidate for MSDP
K - Ack-Pending State
Incoming interface: Vlan 2007, RPF neighbor 20.30.124.4
Outgoing interface list:
Vlan 2006 Forward/Sparse
Incoming interface: Vlan 2007, RPF neighbor 20.30.124.4
Outgoing interface list:
Vlan 2006 Forward/Sparse
Incoming interface: Vlan 2007, RPF neighbor 20.30.124.4
Outgoing interface list:
Vlan 2006 Forward/Sparse
Incoming interface: Vlan 2007, RPF neighbor 20.30.124.4
Outgoing interface list:
Vlan 2006 Forward/Sparse
a directly connect member of the Group
statically configured member of the Group
received a (*,G) Join message
00:06:21/Never
00:06:21/Never
00:06:21/Never
00:06:21/Never
PIM-Sparse Mode (PIM-SM) 1698