Redistribute - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage Information Although the passive interface does not send nor receive routing updates, the network
on that interface is still included in the IS-IS updates sent using other interfaces.

redistribute

Redistribute routes from one routing domain to another routing domain.
C9000 Series
Syntax
redistribute {static | connected | rip} [level-1 | level-1-2 |
level-2] [metric metric-value] [metric-type {external | internal}]
[route-map map-name]
To end redistribution or disable any of the specified keywords, use the no
redistribute {static | connected | rip} [metric metric-value]
[metric-type {external | internal}] [level-1 | level-1-2 |
level-2] [route-map map-name] command.
Parameters
connected
rip
static
metric metric-
value
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Enter the keyword connected to redistribute active routes into
IS-IS.
Enter the keyword rip to redistribute RIP routes into IS-IS.
Enter the keyword static to redistribute user-configured
routes into IS-IS.
(OPTIONAL) Assign a value to the redistributed route. The range
is from 0 to 16777215. The default is 0. Use a value that is
consistent with the destination protocol.
Intermediate System to Intermediate System (IS-IS) 1098