Router-Id - Dell C9000 Series Reference Manual

route-map map-
name
tag tag-value
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.5.1.0
6.1.1.1

router-id

To configure a fixed router ID, use this command.
C9000 Series
Syntax
router-id ip-address
To remove the fixed router ID, use the no router-id ip-address command.
Parameters
ip-address
Defaults none.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
(OPTIONAL) Enter the keywords route-map then the name of
the route map.
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the router ID in the IP address format.
Open Shortest Path First (OSPFv2 and OSPFv3) 1523