Mac Learning-Limit Reset; Show Cam Mac Linecard (Dynamic Or Static) - Dell C9000 Series Reference Manual

Related show mac learning-limit
Commands

mac learning-limit reset

Reset the MAC address learning-limit error-disabled state.
C9000 Series
Syntax
mac learning-limit reset
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.7.1.0
7.5.1.0

show cam mac linecard (dynamic or static)

Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
C9000 Series
Syntax
show cam mac linecard slot-id port-set port-pipe [address mac_addr
| dynamic | interface interface | static | vlan vlan-id]
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays details of the mac learning-limit.
Layer 2 1320