Debug Fip Snooping Rx - Dell C9000 Series Reference Manual

debug fip snooping rx

Enable debugging for FIP snooping receive-specific packets.
C9000 Series
Syntax
debug fip-snooping rx packet-type [all | discovery | virtual-link-
instantiation | virtual-link-maintenance| vlan-discovery]
[interface]
Parameters
packet-type
interface
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Enter the keyword packet-type and then the option type on
which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on all
the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode solicitation.
• virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging on
FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-
discovery to enable debugging on VLAN requests and
notifications.
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
FCoE Transit 855