Dell C9000 Series Reference Manual page 1557

•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.9.1.0
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Usage Information The following describes the show ip ospf statistics process-id global
command shown in the following example.
Row Heading
Total
Error
Hello
DDiscr
LSReq
LSUpd
LSAck
TxQ-Len
RxQ-Len
Tx-Mark
Rx-Mark
Hello-Q
EXEC Privilege
Description
Introduced on the C9010.
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for VRF on E-Series.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the total number of packets the OSPF process receives/
transmits.
Displays the error count while receiving and transmitting packets
by the OSPF process.
Number of OSPF Hello packets.
Number of database description packets.
Number of link state request packets.
Number of link state update packets.
Number of link state acknowledgement packets.
The transmission queue length.
The reception queue length.
The highest number mark in the transmission queue.
The highest number mark in the reception queue.
The queue, for transmission or reception, for the hello packets.
Open Shortest Path First (OSPFv2 and OSPFv3) 1557