Ip Pim Register-Filter - Dell C9000 Series Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0

ip pim register-filter

To prevent a PIM source DR from sending register packets to an RP for the specified multicast source and
group, use this feature.
C9000 Series
Syntax
ip pim register-filter access-list
To return to the default, use the no ip pim register-filter access-list
[vrf vrf-name] command.
Parameters
access-list
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series for the port-channels and the S-
Series.
Enter the name of an extended access list. Maximum 16
characters.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON. Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
PIM-Sparse Mode (PIM-SM) 1681