Virtual Lan (Vlan) Commands - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, see

the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell#show mac learning-limit

Dell#show mac learning-limit interface gigabitethernet 1/0

Virtual LAN (VLAN) Commands

The following commands configure and monitor virtual LANs (VLANs). VLANs are a virtual interface and use

many of the same commands as physical interfaces.

You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs

and SNMP are not supported on a VLAN.

EXEC Privilege

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Added the vlan option on the E-Series.

Introduced on the C-Series.

Added support for the violate-action and detail options.

Added support for Port Channel.

unit unit-number range is from 0 to 7; and the port-id

range is from 1 to 48.

Table of Contents