Telnet-Peer-Stack-Unit - Dell C9000 Series Reference Manual

telnet-peer-stack-unit

Connect through Telnet to a peer stack-unit from a port extender (PE) console.
C9000 Series
Syntax
telnet-peer-stack-unit
Defaults Not configured.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9 (0.0)
Usage Information In a PE stack setup (master unit), use the telnet-peer-stack-unit command to
open a telnet session to the port extender standby unit.
After connecting to the standby unit, you can access the following subset of
commands:
Dell(standby)#?
cd
copy
delete
dir
disable
enable
exit
format
pwd
rename
reset
show
telnet-peer-stack-unit
peer stack-unit
Example
Dell#telnet-peer-stack-unit
Trying Unit 2...
Connected to Unit 2.
Exit character is '^]'.
Login: admin
Password:
• EXEC
Description
Introduced on the C9010 and C1048P.
Change current directory
Copy from one file to another
Delete a file
List files on a filesystem
Turn off privileged commands
Turn on privileged commands
Exit from the EXEC
Format a filesystem
Display current working directory
Rename a file
Reset selected card
PE Show running system information
Open a telnet connection to the
PE Console Commands 1624